 |
|
Specialists in
the controlled application of lubricants
|
|||
 |
|
SYSTEM
DESIGN |
ASSEMBLY LUBRICANT DISPENSING | |||
|
|
|||||
| This can be done in many ways depending on the application and type of lubricant being used. Also monitoring and machine inter locking is to be taken into account | |||
| Using the correct dispensing equipment and control system, will ensure that lubricant is supplied only to the areas required and the correct amount is delivered every time, also, there is minimal contact between the lubricant and the machine operator The photographs illustrate various dispensing assemblies for: bearing check then lubricate, and greasing the drive gear in a windscreen wiper gear box, also bush assemblies and ball joints. Precision Grease Dispensers have been developed extensively for the automotive industry but the same knowledge can be adapted for any application. As in the assembly of shower valves with silicon based grease. | |||
| By using lubricant metering devices such as progressive elements and oval gear units connected to an automatic pump station the amount of lubricant dispensed is totally variable electronically and will allow machine interlocking along with warnings for no flow of lubricant (see Control Panel page) | |||
|
Air operated
single
Shot ejector |
 |
Oval geared pulse meter
for larger amounts of fluids. |
 |
|
Single shot
unit for
shower valve |
 |
Windscreen
wiper motor
Gear box greasing unit |
 |
|
|
||||
|
Controlled
Lubrication
|
||||
|
|
||||
|
Website By Lardy
|