 |
|
Specialists in
the controlled application of lubricants
|
|||
 |
|
SYSTEM
DESIGN |
OPEN GEAR
GREASE SPRAY |
|||
|
|
|||||
|
Controlled Lubrication design the open gear spray system to suit any width of pinion gears. The system can be installed and operated from a one-off pulverising mill, to the full mill bay of a coal-fired power station. |
||
|
The system
is designed to spray a fixed amount of open gear grease at regular intervals
and evenly across the face of the pinion tooth. This is achieved by
pumping grease through a progressive distributor, to a number of air
atomising spray nozzles. If any fault should occur an alarm will be
set and stating the fault in written form on the HMI screen.
A general alarm is available for remote use |
|
NO
FLOW GREASE
|
NO FLOW OF AIR |
RESERVOIR
LOW
|
| System Outline | ||
|
Running from
a central or individual control unit and pump station, The system is
interlocked to the individual mill so, when the mill shuts down, the
spray system automatically shuts off.
|
The equipment cabinet is mounted as close as possible to the spray panel but outside any machine guarding, this allows testing and maintenance | The spray panel is constructed from mild or stainless steel plate and fixed to the guard by bolting or can be hinged to allow inspection of the gears |
 |
 |
 |
|
|
||||
|
Controlled
Lubrication
|
||||
|
|
||||
|
Website By Lardy
|